Handheld Acoustic Imaging Camera
Professional handheld acoustic imaging camera with a 64-channel MEMS microphone array, real-time ultrasonic heatmap overlay, and wide working range for industrial leak detection and fault identification.
Key Features:
✔️ 64 MEMS digital microphones for high-density acoustic signal capture
✔️ 200kHz sound sampling rate covering 2kHz to 100kHz frequency range
✔️ 58° × 45° field of view with live acoustic heatmap overlay on camera image
✔️ Three imaging modes: Single-source, Multi-source, and All-source
✔️ Noise Suppression Mode and Micro-Detection Mode for dual detection capability
✔️ Detects leaks as small as 0.01L/min at 0.1MPa from 1.5 meters away
✔️ Working distance of 0.3 to 60 meters for close and long-range inspections
✔️ 5MP industrial-grade digital camera with 3.5-inch IPS LCD touchscreen (640×480)
✔️ Field-replaceable 3.6V / 5000mAh lithium battery with 3+ hours runtime per charge
✔️ IP54-rated housing with 2-meter drop resistance and USB Type-C connectivity
Handheld Acoustic Imaging Camera
The Handheld Acoustic Imaging Camera runs on a 64-channel MEMS digital microphone array. Its light-blue ABS polymer body also features a ribbed pistol grip. The rear carries a 3.5-inch IPS LCD touchscreen at 640×480 pixels with explosion-proof cover glass. A 5MP industrial-grade digital camera sits on the front panel. It runs on a field-replaceable 3.6V / 5000mAh lithium battery for at least 3 hours, two batteries included. Additionally, USB Type-C handles data at USB 3.0 speeds. Rated IP54 with 2-meter drop resistance, 25g shock, and 2g vibration resistance.
Furthermore, the sound imaging device samples at 200kHz — above the 20kHz human hearing ceiling. Its frequency spans 2kHz to 100kHz. Its 58° × 45° field of view overlays a live acoustic heatmap onto the camera image. Three modes operate: Single-source, Multi-source, and All-source. Noise Suppression Mode filters ambient sounds to isolate fault signals. Moreover, Micro-Detection Mode captures faint ultrasonic emissions for early fault identification.
The Handheld Acoustic Imaging Camera covers four fault types: compressed air leaks, vacuum failures, pneumatic valve faults, and vibration. The MEMS microphone array camera detects leaks as small as 0.01L/min at 0.1MPa from 1.5 meters. Therefore, inspectors scan 0.3 to 60 meters without shutdown.
Tactical Supply Pakistan stocks the FOTRIC TD2e Kit with full technical support. As a result, it is a verified source for acoustic camera tools in Pakistan. This industrial leak detection camera ships with two batteries, a dock, and a 32GB TF card. In addition, a holster, soft bag, and hard case are included.
Can an acoustic camera detect leaks without touching equipment?
Yes. The ultrasonic leak detector scans 0.3 to 60 meters. It overlays fault locations as a heatmap. Finally, this enables detection in pressurized and vacuum systems without stopping production.
HAVE QUESTIONS?
Fill out the form, and our team will respond promptly to assist with your product inquiries or order support.
