Quick-Wear Anti-Riot Suit
A modular full-body protective suit designed for rapid deployment and enhanced impact and stab protection during riot control and tactical law enforcement operations.
Key Features:
✔️ Full-Body Modular Protection covering chest, back, arms, waist, thighs, and legs
✔️ Composite Construction: polyimide plastic, PC, nylon, EVA foam, and flame-resistant fabric
✔️ Anti-Stab Protection: 20J–42J resistance with zero blade penetration
✔️ High Impact Resistance: withstands 120J–168J blunt force energy
✔️ Kinetic Energy Absorption: front and back panels rated to 100J
✔️ Quick-Release System for rapid removal in emergency situations
✔️ Lightweight Tactical Design: approximately 5.8–7.6 kg depending on configuration
✔️ High-Strength Fastening System: buckles ≥500N and belts ≥2000N
✔️ Operational Temperature Range: −20°C to +55°C (down to −30°C for select models)
✔️ Rapid-Don Configuration enabling fast deployment during riot response operations
Quick-Wear Anti-Riot Suit
The Quick-Wear Anti-Riot Suit is a full-body protective system available in four model configurations — FBF-B-SK06, FBF-B-SK05, FBF-C-XJ02, and a standard hard-shell variant — each built from plastic polyimide, non-flammable fabrics, PC, nylon, and EVA foam composites. The suits cover front chest, back, upper limbs including shoulders and elbows, and lower limbs with modular components including body guard, arm/elbow/shoulder guard, waist/thigh guard, and leg/shin guard. Weight ranges from 5.8kg to 7.6kg depending on configuration, with the SK06 reaching 7.6kg fully loaded and 6.3kg without the bulletproof layer.
All four variants deliver anti-stab resistance between 20J and 42J with zero knife-tip penetration on front chest and back panels. Impact resistance holds at 120J–168J without damage or cracking. The front chest and back absorb 100J kinetic energy with cement indentation depths between 5.2mm and 16mm depending on model. The FBF-C-XJ02 adds a one-key quick-release mechanism, hollow cushioning structure preventing liquid ingress, removable thermal conductivity lining, and anti-aging modified PC construction. Structural connection strength across all models maintains buckle strength above 500N, Velcro at ≥7.0N/cm², and connecting belt strength exceeding 2000N. Operating temperature tolerance spans -20°C to +55°C, with the XJ02 rated for -30°C environments.
Law enforcement units deploy the Quick-Wear Anti-Riot Suit during crowd control operations, protest management, prison riot response, and high-risk suspect apprehension. Border security teams use these suits during forced-entry operations where blunt trauma and edged-weapon threats are simultaneous. Municipal rapid-response units rely on the quick-don design during civil disturbances requiring fast field deployment.
For agencies sourcing reliable full-body riot protection, Tactical Supply Pakistan offers all four suit configurations with model-specific consultation covering protection area requirements, weight constraints, and operational temperature conditions for each deployment context.
What is the difference between the SK06 and XJ02 models in terms of deployment speed?
The FBF-C-XJ02 features a hidden one-key quick-release mechanism operable with a single hand and a wear-off time of under 90 seconds, making it faster to don and remove than the SK06, which uses standard buckle and Velcro fastening without a dedicated quick-release system.
HAVE QUESTIONS?
Fill out the form, and our team will respond promptly to assist with your product inquiries or order support.
